Filter
Top Products
[POSITION] menu
72 - ENGLISH
Settings
Select [POSITION] from the main menu, and
select the item from the sub-menu.
Refer to “Navigating through the menu”
(
page 61) for the operation of the menu
screen.
z
After selecting the item, press
to set.
[SHIFT]
You can move the image position vertically or
horizontally if the image position projected on the
screen is shifted even when the relative position of the
projector and the screen is installed correctly.
1) Press
to select [SHIFT].
2) Press the <ENTER> button.
z
The [SHIFT] screen is displayed.
3) Press
to adjust the position.
■
For vertical (up and down)
adjustment
Operation Adjustment
Press
.
The picture
position moves
up.
Press
.
The picture
position moves
down.
■
For horizontal (right and left)
adjustment
Operation Adjustment
Press
.
The picture
position moves to
the right.
Press
.
The picture
position moves to
the left.
[ASPECT]
You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range
selected in [SCREEN SETTING]. Set [SCREEN
SETTING] rst.(
page 90)
1) Press
to select [ASPECT].
2) Press
or the <ENTER> button.
z
The [ASPECT] individual adjustment screen is
displayed.
3) Press
to switch the [ASPECT].
z
The setting will change as follows each time
you press the button.
[VID AUTO]
*1
[DEFAULT] [THROUGH]
[AUTO]
*2
[HV FIT] [16:9]
[V FIT] [H FIT] [4:3]
*1: For video signals and Y/C signals (NTSC) only
*2: For RGB (480i or 480p) signal input only
■
[DEFAULT]
Pictures are displayed without changing the aspect
ratio of the input signals.
■
[VID AUTO]
The projector identies the video ID (VID) embedded
in the image signals and displays the image by
automatically switching the screen sizes between 4:3
and 16:9. This function is effective for NTSC signals.
■
[AUTO]
The projector identies the video ID (VID) embedded
in the image signals and displays the image by
automatically switching the screen sizes between
4:3 and 16:9. This function is effective for 480i/480p
signals.
■
[THROUGH]
Pictures are displayed without changing the resolution
of the input signals.
[POSITION] menu