Filter
Top Products
7
Simple setup
RQT7534
7 Connecting a television with COMPONENT VIDEO IN
terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B/PR) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
¡The description of the component video input terminals
depends on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y,
Y/C
B/CR). Connect to terminals of the same color.
¡After making this connection, change the black level for a better
picture (A page 28, Video – Black Level Control).
To enjoy progressive video
¡ Connect to the component video (480P) input terminals on a
television compatible with this unit’s copy guard system.
(Video will not be displayed correctly if connected to an
incompatible television.)
¡ Press [PROGRESSIVE] on the main unit so “PROG.” appears
on the display (A page 12).
¡ All televisions manufactured by Panasonic and that have
480P input connectors are compatible. Consult the
manufacturer if you have another brand of television.
7 Connecting a television with a VIDEO IN terminal
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because
the picture may not be played correctly due to the copy guard.
7 Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
P
B
IN
S-VIDEO