Filter
Top Products
3 Pull the unit out of the dashboard.
Removing and re-attaching the
front panel
You can remove the front panel to protect your
unit from theft.
Press thedetach button and push the front
panel upward and pull it toward you.
For details, referto Removing the front panel to
protect your unit from theft and Re-attaching the
front panel on page 5.
Securing the front panel
The front panel can be secured withthe sup-
plied screw.
1
1 Screw
Installing the microphone
CAUTION
It is extremely dangerous to allow the micro-
phone lead to become wound around thesteer-
ing column or shift lever. Be sureto install the
unit in such a way that it willnot obstruct driv-
ing.
Note
Install the microphone in a position and orienta-
tion that will enable it to pickup the voice of the
person operating the system.
When installing the microphone
on the sun visor
1 Install the microphone on the micro-
phone clip.
1
2
1 Microphone
2 Microphone clip
2 Install the microphone clip on the sun
visor.
With the sun visor up, installthe microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)
1
2
1 Microphone clip
2 Clamp
Use separatelysold clamps tosecure the
lead wherenecessary inside thevehicle.
When installing the microphone
on the steering column
1 Install the microphone on the micro-
phone clip.
2
4
3
1
1 Microphone
2 Microphone base
3 Microphone clip
4 Fit the microphonelead into the groove.
# Microphone canbe installed without usingmi-
crophone clip.In this case,detach the microphone
base fromthe microphone clip.To detach themicro-
phone basefrom the microphoneclip, slide the mi-
crophone base.
2 Install the microphone clip on the steer-
ing column.
2
1
3
1 Double-sided tape
2 Install the microphone clipon the rearside of
the steeringcolumn.
3 Clamp
Use separatelysold clamps tosecure the
lead wherenecessary inside thevehicle.
Adjusting the microphone angle
The microphone angle can be adjusted.
English
Installation
19
Section
Installation
En
03
<QRD3123-A/N>19