Filter
Top Products
BOOKMARK (bookmark)
1 Press M.C. tostore track information.
S.RTRV(sound retriever)
Automatically enhancescompressed audio and
restores richsound.
1 Press M.C. toselect the desiredsetting.
Fordetails, refer to Enhancingcompressed
audio andrestoring rich sound (soundretriever)
on theprevious page.
Using Bluetooth wireless
technology
Using Bluetooth telephone
Important
! Since this unit is on standby toconnect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
! Operations may vary depending on the kind
of cellular phone.
! Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe
place when using these advanced opera-
tions.
! Be sure to park your vehicle in a safe place
and apply the parking brake when perform-
ing this operation.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit foruse with
your cellular phone.
1 Connection
Operate theBluetooth telephone connection
menu. Referto Connection menuoperation on
this page.
2 Function settings
Operate theBluetooth telephone function
menu. Referto Phone menuoperation on the
next page.
Basic operations
Making aphone call
1 Refer to Phonemenu operation on thenext
page.
Answering anincoming call
1 When a call isreceived, press
.
Ending acall
1 Press
.
Rejecting anincoming call
1 When a call isreceived, press andhold
.
Answering acall waiting
1 When a call isreceived, press
.
Switching betweencallers on hold
1 Press M.C.
Canceling callwaiting
1 Press andhold
.
Adjusting theother party’s listening volume
1 Press c ord while talkingon the phone.
! When privatemode is on,this function isnot
available.
Turning privatemode on oroff
1 Press BAND/
while talkingon the phone.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
! The estimated call time appears in thedis-
play (this may differ slightly from the actual
call time).
Storing and recalling phone numbers
1 If you find a phone number that you
want to store to memory,press and hold
down one of the presettuning buttons (1/
to 6/ )to store it to the relevantpreset
tuning button.
The functions below can be used to storephone
numbers to the memory. For details, refer to
Phone menu operation on the next page.
! MISSED (missedcall history)
! DIALED (dialedcall history)
! RECEIVED (receivedcall history)
! PHONE BOOK(phone book)
2 Press one of the preset tuning buttons
(1/
to 6/ )to recall the desired phone
number.
3 Press M.C. to make a call.
Switching the display
Selecting thedesired text information
You can changethe display duringa call.
1 Press DISPto cycle between thefollowing:
! Call time
! Name ofother party
! Number ofother party
Using voice recognition
This feature can be used on an iPod equipped
with voice recognition that is connected by
Bluetooth with the source set to iPod or
BTAUDIO.
% Press and hold M.C. to switch to voice
recognition mode.
The commands available with this unit arelisted
below.
! Song playback
! Making aphone call
Note
For detailson voice recognition features, check
the manual for the iPod you are using.
Connection menu operation
Important
! Be sure to park your vehicle in a safe place
and apply the parking brake when perform-
ing this operation.
! Connected devices may not operate properly
if more than one Bluetooth device is con-
nected at a time (e.g. a phone and aseparate
audio player are connected simultaneously).
1 Press and hold
to display the connec-
tion menu.
# You cannot operatethis step duringa call.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Operating this unit
10
Section
Operating this unit
En
02
<QRD3123-A/N>10