Filter
Top Products
23
RQT7994
ConnectionsSettingsBasic Operations Before useOperationsReference
Select if noise is excessive during radio reception.
Preparation: Enter the MULTI CONTROL. (ápage 22 “Basic operations with the MULTI CONTROL”)
Preset tuning
Presetting stations
n Auto presetting
1
Set the channel reception to FM 87.9 MHz or AM
530 kHz.
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2
Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3
Select “TUNER ” and press [ENTER].
4
Select “AUTO MEM ” (AUTO MEMORY) and
press [ENTER].
5
Select “START ” and press [ENTER].
•Select “CANCEL ” to cancel.
START,
CANCEL
• During automatic presetting, the memory indicator ( ) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not preset correctly when broadcast waves are too
strong or too weak. In such cases, carry out presetting manually.
CANCEL
MULTI
CONTROL
M
n Manual presetting
1
Tune to the station you want to preset. (ápage 22)
2
Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3
Select “TUNER ” and press [ENTER].
4
Select “MEMORY ” and press [ENTER].
5
Select a channel number and press [ENTER].
“STORED ” is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune another
station from step 1.
6
Press [MULTI CONTROL, CANCEL] 2 times to
select “EXIT ” and press [ENTER].
• Even if the AC power supply cord is disconnected from the household AC
outlet, the stations remain in the memory for approximately two weeks.
• FM stations can also be preset in the MONO mode. (ábelow)
CANCEL
MULTI
CONTROL
Listening to preset stations
n On the remote control
• Select the channel
• Press the numbered buttons to select the channel
To select a two digit number
e.g. 21
: [≧ 10, ENTER] → [2] → [1]
n On the main unit
1
Press.
2
Select the channel.
After 5 seconds, the display will change from the channel number
to the frequency.
• Hold down the button to change channels faster.
Reducing excessive noise
n During FM stereo reception
You can improve FM reception by switching reception to monaural.
n During AM reception
When there is a lot of noise interference with an AM broadcast, try
switching to this mode.
1
Select “TUNER ” and press [ENTER].
1
Select “OPTION ” and press [ENTER].
2
Select “FM MODE ” and press [ENTER].
2
Select “B PROOF ” (BEAT PROOF) and press [ENTER].
3
Select “MONO ” and press [ENTER].
•Select “AUTO ” to cancel.
AUTO,
MONO
3
Select “MODE A ” or “MODE B ” and press [ENTER].
4
Press [MULTI CONTROL, CANCEL] 2 times to select
“EXIT ” and press [ENTER].
4
Press [MULTI CONTROL, CANCEL] 2 times to select
“EXIT ” and press [ENTER].