Filter
Top Products
14
RQT7994
ConnectionsSettingsBasic OperationsOperations Before useReference
Basic operations
nPlaying DVD-Audio
Playing DVD ANALOG 6CH
You can enjoy high quality sound with DVD-Audio.
áRefer to page 5 for “DVD ANALOG 6CH connection”.
Preparation:
• Turn SPEAKERS on.
DVD ANALOG 6CH only works when either SPEAKERS A or BI-WIRE
is on.
• Set the selector to “DVD ”. (áabove)
• When you connect to a DVD recorder, playback is not possible if “DVR ”
is selected for input. Select “DVD ”.
Press and hold until “DVD 6CH ” is displayed.
To cancel, press and hold until “DVD ” is displayed.
• Speaker settings (ápages 12, 21) are ineffective. Change
the settings on the DVD player if necessary.
Enjoying high quality 2-channel sound
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1. Cancel the “DVD 6CH ” setting. (áabove)
2. Set the input signal to “ANALOG ” in “Input signal
settings”.
(ápage 13)
nUsing SPEAKERS B
áRefer to page 8 for connecting SPEAKERS B.
Sound is output from the speaker connected to
the FRONT B terminals on this unit.
To turn off the sound from the speaker connected to the A terminals,
press [SPEAKERS A] and cancel .
If you select SPEAKERS B only:
• Playback is in stereo (2-channel).
• When a multi-channel source is played with digital connections,
“2CH MIX” is displayed and the sounds intended for all the speakers are
played through the front speakers.
When DVD ANALOG 6CH is selected, the sound from the front 2 channels is output.
If you select SPEAKERS B only, the following are set automatically
irrespective of settings selected in speaker settings (ápages 12, 21).
• Speaker size: LARGE
• Subwoofer: NO
(Bass is output from the front speakers.)
nUsing headphones
Press to turn all the speakers off.
Reduce the volume and connect the
headphones. The sound from the
headphones automatically becomes
2CH MIX.
When DVD ANALOG 6CH is selected, the sound from the front 2
channels is output.
Playback