Filter
Top Products
13
BASIC OPERATIONS
Standby
• When the phone is not in use, the
POWER LED on the base is
turned on and the LCD on the
POD displays your phone number,
if programmed.
Answering Calls
When there is an incoming call, the GREEN LEDs on the base and the POD
blink and the
icon flashes on the display. The speaker on the POD rings
the selected melody.
• Press any key to answer except
‘+’ and ‘-‘keys.
•
The call timer and clock icon are
displayed. The call timer starts
with MM:SS (minute and second).
•
The talk time remaining counter
and hour glass icon are also
displayed. The talk timer starts
with HH:MM (hour and minute).
Note:
1. The call timer displays the time elapsed on the current active call.
2. The talk time remaining counter displays the estimated remaining in use
time at the current battery level before the batteries become empty. If for
any reason the talk time remaining counter displays 00-00 for a prolonged
period of time or is severely inaccurate, charge the POD for a full 15
hours and the counter should reset.
3. When POD is being charged during talk mode, no talk timer will be
displayed. “-- --“ is shown on the display.
14
Making Calls
You can make a call by
• pressing PHONE key and then dialing phone number;
•
dialing phone number and then pressing PHONE key;
• redialing the last number you dialed;
• dialing the number in phone book.
Traditional Dialing
The phone line is seized before the phone number is entered. The phone
number cannot be edited or verified before dialing.
• Press PHONE key.
(The Phone icon turns on and
your phone number turns off.)
•
Dial the number. Digits are
displayed.
(Pressing * and # shall display “
”
and “
” respectively.)
• Call timer and talk time remaining
counter icons are displayed a
while after the last key press.
• To end the call, press PHONE
key.
Note: If more than 18 digits are dialed, only the last 18 digits
shall be displayed. The Scroll icon shall turn on.
No limit on the number of digits being dialed out.