Filter
Top Products
31
Programming
Recall Duration
• Press and hold PROGRAM key
during Standby.
• Press “3” to select recall duration
programming. (The default setting
100ms duration is displayed.)
• Press PROGRAM key to select
Recall duration programming.
(The current selection flashes.)
• Press “1” to “4” to select duration
1 to duration 4 respectively.
(The flash durations are displayed
in milliseconds and country
dependent. The selection flashes.)
•
Press
PROGRAM
key to confirm
the selection
• Press CLEAR key to exit.
32
Programming
Users Phone Number
• Press and hold PROGRAM key
during Standby.
•
Press
“4”
to select user phone
number programming.
(The current number is displayed if
it has been programmed;
otherwise a blank screen will be
displayed.)
• Press PROGRAM key to select
phone number programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the current number one by
one.
•
Press and hold
CLEAR
key to
erase the entire number and enter
new numbers.
• Press PROGRAM key to confirm
the editing.
•
Press
CLEAR
key to exit.