Filter
Top Products
39
QUICK REFERENCE GUIDE
Program Network
Services Number
• Press and hold
→ Press 5 → → Press
to erase digit or enter new number → Press
Program Service
Centre Number
• Press and hold
→ Press 6 → → Press
to erase digit or enter new number → Press
Set Default Setting
• Press and hold
→ Press and hold 9 → Press
40
TROUBLE SHOOTING
Cannot make a call…
1. Check that the microphone is ON during the call. The GREEN
microphone indicators should be lit.
2. Check that the telephone line is connected to the socket on the back of
the base unit and to the wall phone socket.
3. Check that the power adaptor is connected to the base.
4. Ensure that POD has a charged battery or has the power adaptor
connected and turned on.
Sound quality is poor…
1. Keep noisy equipment (e.g. fans or computer’s) away from the base and
POD units to avoid excessive noise.
2. Terminate the call and call the other party again to see whether another
line provides a better connection.
3. Speak closer to the POD for a better reception.
TECHNICAL DATA
Audio Bandwidth 200 to 3800 Hz
Speaker Volume 90 dBspl A weighted
Power Supply 230 VAC 50 Hz, 7 VDC 400 mA (for Base)
230 VAC 50 Hz, 12 VDC 500 mA (for POD)
Battery pack of 6 AA 1800 mAh (POD only)
FACTORY DEFAULT VALUES
Items Factory Default
Speaker Volume on Portable Part Medium
Ringer Volume Volume 3
Ringer Melody Melody 1
Dialing Mode Tone
Recall Duration Duration 1 (100ms)
Redial Record Empty
Phonebook Records Empty
User Phone Number Record Empty
Network Service Number Record Factory Default
Service Centre Number Record Factory Default