Filter
Top Products
9
Follow these steps to connect the cassette recorder
to AC power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the size H Adaptaplug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the cassette recorder’s
DC3V
jack.
4. Plug the adapter into a standard AC outlet.
Note:
Connecting the AC adapter automatically dis-
connects internal batteries.
Using Vehicle Battery Power
You can power the cassette recorder from a vehicle’s
12V power source (such as cigarette-lighter socket)
using a 3V, 200 mA DC adapter and a size H
Adaptaplug
®
(neither supplied). Both are available at
your local RadioShack store.
Cautions:
You must use a power source that
supplies 3V DC and delivers at least
200 mA. Its center tip must be set to
negative and its plug must fit the cassette re-
corder’s
DC3V
jack. Using an adapter that does
!
14-1239a.fm Page 9 Wednesday, August 25, 1999 4:00 PM