Filter
Top Products
8
Using AC Power
You can power the cassette recorder using a 3V, 200
mA AC adapter and a size H Adaptaplug
®
(neither
supplied). Both are available at your local Ra-
dioShack store.
Cautions:
You must use a Class 2 power source
that supplies 3V DC and delivers at
least 200 mA. Its center tip must be
set to negative and its plug must fit the cassette
recorder's
DC3V
jack. Using an adapter that
does not meet these specifications could dam-
age the cassette recorder or the adapter.
• Always connect the AC adapter to the cassette
recorder before you connect it to AC power.
When you finish, disconnect the adapter from
AC power before you disconnect it from the cas-
sette recorder.
!
14-1239a.fm Page 8 Wednesday, August 25, 1999 4:00 PM