Filter
Top Products
66
Using the Listening Modes
See “About the Listening Modes” on page 71 for
detailed information about the listening modes.
Selecting on the AV receiver/AV amplifier
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver/AV
amplifier’s display is turned off and only video sig-
nals input through HDMI IN can be output. Pressing
this button again will select the previous listening
mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
■ [STEREO] button
This button selects the Stereo listening mode.
■ [SURR] button
This button selects the Dolby Digital and DTS listen-
ing modes and the Neural THX Surround listening
mode.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver’s dis-
play is turned off and only the HDMI OUT outputs
video signals.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [ALL ST] button
This button selects the All Channel Stereo listening
mode.
Selecting Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver/AV amplifier
with a digital audio connection (coaxial or
optical).
• Listening mode availability depends on the
format of the current input signal.
STEREO
PURE AUDIO
LISTENING MODE
SURR
STEREO
/
PURE A
DIRECT
THX
ALL ST
TX-SR705_En.book Page 66 Monday, May 28, 2007 2:13 PM