Onkyo TX-L55 Stereo Receiver User Manual


 
43
Using the Listening Modes
—Continued
This setting determines if Dolby Digital and DTS mate-
rial is played using 6.1-channels or 5.1-channels. This
setting only applies when you’re using a surround back
speaker, the Speaker Configuration Surr Back setting is
set to something other than Non (page 48), and the sur-
round information in the current digital input signal is 3/
2.1 or 3/3.1. To check the format of a digital input signal,
see “Displaying Source Information” on page 46.
This setting affects Dolby Digital and DTS sources as
follows:
Dolby Digital
Auto:
If the source signal contains a Dolby Digital
EX flag, Dolby Digital EX 6.1 is used. If not,
Dolby Digital 5.1 is used.
On:
Dolby Digital EX 6.1 is used regardless of
whether the source signal contains a Dolby
Digital EX flag. You can choose Dolby Digital
EX or PL IIx Music mode with the [SURR]
button.
Off:
Dolby Digital 5.1 is used even if a Dolby Dig-
ital EX flag is present.
DTS
Auto:
If the source signal contains a DTS-ES flag,
DTS-ES Discrete (6.1) or DTS-ES Matrix
(6.1) is selected automatically. If not, DTS 5.1
is used.
On:
DTS-ES 6.1 is used regardless of whether the
source signal contains a DTS-ES flag. If the
source signal contains a DTS-ES flag, DTS-ES
Discrete (6.1) or DTS-ES Matrix (6.1) is
selected automatically. If the source signal
does not contain a DTS-ES flag, you can
choose DTS+Dolby EX, PL IIx Music, or
DTS+Neo:6 with the [SURR] button.
Off:
DTS 5.1 is used for all DTS sources, even if a
DTS-ES flag is present.
Dolby Digital/DTS Setting
(5.1- or 6.1-channel Playback)
1
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
+
10 0
CLEAR
123
456
789
--/---
INPUT
I
+
-
ENTER
S
E
T
U
P
R
E
T
U
R
N
CINE FLTR
CH SEL
TEST TONE
P MEM
TUN
+
TUN
-
DSP
STEREO
SURR
DIRECT
L.NIGHT
T
O
P
M
E
N
U
M
E
N
U
VOL
+
-
DVD
TV
AMP
TV AUX
TUN
DVD
V1
INPUT SELECTOR
V2
DISC
CH
TONE
REMOTE
MODE
TUNER
DISPLAY
TV
INPUT
PREV
CH
DIMMER SLEEP
RANDOM
SP A SP B
MUTING
EXIT GUIDE
ANGLE
SEARCH
SUBTITLEAUDIO
MEMORYA
-
BREPEAT
ON STANDBY
T
V
TV CH
T
V VOL
RC
-
577S
LAST M
OPEN
/
CLOSE
TUN M
VIDEO OFF
LEVEL LEVEL
+
_
+
-
PLAY MODE
AMP
SETUP
ENTER
AMP
TUNER
2
Use the Up and Down [ ]/[ ]
buttons to select “5. Audio Adj,”
and then press [ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “Surr Bk,” and
then use the Left and Right [ ]/
[] buttons to select Auto, On, or
Off.
4
Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
ENTER