Filter
Top Products
22
Connecting AV Components
—Continued
Monitor Out
■
Using Composite Video
Use a composite video cable to connect the TX-L55’s
V MONITOR OUT to a composite video input on your
TV, as shown.
■
Using S-Video
Use an S-Video cable to connect the TX-L55’s
S MONITOR OUT to an S-Video input on your TV, as
shown.
■
Using Component Video
Use a component video cable to connect the TX-L55’s
COMPONENT MONITOR OUT to a component video
input on your TV, as shown.
Audio Connections
These connections will allow you to listen to audio from
your TV via the TX-L55.
If your TV has no audio outputs, connect the TX-L55 to
your VCR and use its tuner (see page 24).
Note:
• Initially, the OPT 1 digital input is assigned to the TV
input source. If you connect to a different digital audio
input or only to an analog input, you’ll need to assign
it to the TV input source (see page 31).
■
Using a Coaxial or Optical Connection
• Use an optical digital audio cable to connect the
TX-L55’s OPT 1 DIGITAL INPUT to the optical
output on your TV, as shown.
OR
• Use a coaxial digital audio cable to connect the
TX-L55’s COAX DIGITAL INPUT to the coaxial
output on your TV, as shown.
■
Using Analog Connections
If your TV doesn’t have digital audio outputs, or you
want to record from it, you’ll need to make the following
analog audio connections.
Use an analog audio cable to connect the TX-L55’s TV
IN L/R inputs to the analog audio outputs on your TV, as
shown.
Connecting Your TV or Projector
MONITOR
OUT
V
VIDEO IN
TV, projector,
etc.
MONITOR
OUT
S
S VIDEO IN
TV, projector,
etc.
YPB PR
COMPONENT
VIDEO IN
YP
COMPONENT
B PR
TV, projector,
etc.
COAX
OPT1
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
TV, projector,
etc.
Connect one
or the other
IN
TV
AUDIO
OUTPUT
L
R
TV, projector,
etc.