Filter
Top Products
30
Selecting an input source
Selecting the speaker system
The TX-DS777/676 can connect to two speaker systems. You can
switch between the two speaker systems by using the SPEAKERS A
and B buttons.
Selecting Speaker system A (SPEAKERS A indicator appears.)
Press the SPEAKERS A button to turn on or off the speakers con-
nected to the FRONT SPEAKERS A, CENTER SPEAKER and
SURROUND SPEAKERS terminals.
Selecting Speaker system B (SPEAKERS B indicator appears)
Press the SPEAKERS B button to turn on or off the speakers con-
nected to the FRONT SPEAKERS B terminals.
Notes:
• Be sure to select Speaker system A during surround playback or
when multi-channel input is enabled.
• Selecting Surround playback when both speaker systems are on
automatically turns off the speaker system B. Similarly, turning
on both speaker systems during Surround playback automati-
cally sets the listening mode to STEREO.
A SPEAKERS B
Changing the display
The display changes each time you press the DISPLAY button dur-
ing playback.
(The European model allows you to receive RDS broadcasts. See
page 46 for details.)
DISPLAY
SPEAKERS
A
DSP
AUTO
TUNED
ch
SPEAKERS
A
DSP
AUTO
TUNED
SPEAKERS
A
DSP
AUTO
TUNED
ch
SPEAKERS
A
DSP
AUTO
TUNED
SPEAKERS
A
DSP
AUTO
TUNED
Frequency Preset channel Listening mode
Preset station name
(Does not appear if no name is given.)
Listening mode
Preset input source name
(Does not appear if no name is given.)
During Dolby Digital, DTS or MPEG
playback, the input signal format for
the playback software appears.
*
FM/AM:
Other sources:
• For analog signals, “Input source name” or “Listening mode”
can be selected.
• “Input signal format” returns to “Listening mode” within
three (3) seconds.
Input signal format:
• Current sampling frequency displays for PCM signals
(ex. “PCM 44.1 kHz”). No correct information displays, how-
ever, for the frequencies other than 32, 44.1, 48, and 96 kHz.
• For Dolby Digital/DTS/MPEG, the surround channels informa-
tion may also display. For example, “Dolby D 3/2” indicates
that the source outputs signals for three front channels and two
surround channels in Dolby Digital mode.