Filter
Top Products
65
Controlling Other Components—Continued
PLAY MODE button
Selects play modes on components with selectable
play modes.
Works as a Resume button when used with a DS-A2
RI Dock.
RANDOM button*
Used with the shuffle function.
* Buttons marked with an asterisk (*) are not supported by 3rd
generation iPod models.
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your
cassette recorder, you can control your cassette recorder
with the following buttons.
The [TV/TAPE] button is preprogrammed with the
remote control code for controlling an Onkyo cassette
recorder when used with an connection.
For details on entering a remote control code for a
different component, see page 60.
On twin cassette decks, only Deck B can be controlled.
ON/STANDBY button
Turns the cassette recorder on or off.
Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [ ] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [ ]/[ ] buttons may not work
properly with some cassette tapes.
Rewind and Fast Forward []/[ ]
buttons
The Rewind [] button starts rewind. The Fast
Forward [] button starts fast forward.
Reverse Play [ ] button
Starts reverse playback.
Play [ ] button
Starts playback.
MUTING button (39)
Mutes or unmutes the AV receiver.
VOL []/[ ] button (38)
Adjusts the volume of the AV receiver.
Stop [] button
Stops playback.
Note:
An Onkyo cassette recorder connected via can also
be controlled in Receiver mode.
Controlling a Cassette Recorder
Press the appropriate
REMOTE MODE button first
* With some components, certain buttons may not
work as expected, and some may not work at all.