Filter
Top Products
21
Before Using
Connections
Other Information
Operation
6 Press DOLBY NR until the Dolby
NR mode you want to record
with lights in the display.
See “Dolby Noise Reduction Systems” on
page 15 for Dolby NR mode information.
Each press changes the indicator in the
display in the following order:
B (Dolby B NR) C (Dolby C NR)
The indicator goes off.
7 Press REC LEVEL / to adjust
the recording levels (0 to 50).
The recording level indication appears in
the display instead of the digital counter.
The level between 14 and 24 should suit
most recording cases.
• When using NORMAL (TYPE I) or
HIGH (TYPE II) type cassette
Check the incoming signal level indicator.
The bottom red bar should light
constantly, and the second red bar from
the bottom should light occasionally.
• When using METAL TAPE (TYPE IV)
cassette
Check the incoming signal level
indicator. The second red bar from the
bottom should light constantly, and the
third red bar from the bottom should
light occasionally.
Note
If you do not set the proper recording level for
the tape type, the sound may be distorted.
8 Set the CD player or MD
recorder to start playing at the
point you want to start
recording from.
9 Press on the CD player or MD
recorder.
CD or MD recording starts.
Note
Even if CD playback is stopped before dubbing is
complete, the unit continues recording.
To stop recording
Press on the unit. (The CD player or MD
recorder continues playing.)
To interrupt synchro dubbing
Press or on the CD player or MD recorder.
The unit enters recording pause.
To continue recording, press
or on the
unit (
the button indicated in the display).
K-505TX (This unit)
Display
REC LEVEL
/
DOLBY
NR
C-705TX (CD player) is used
for the illustration example.
B
Indicator lights.
STANDBY/ON
STANDBY
STEREO CASSETTE TAPE DECK
ALBUM
DOLBY NR
REV. MODE
COUNTER RESET
REC LEVEL
CD DUBBING
FADE
CASSETTE LOADING MECHANISM
DOLBY NR
RL
Red
Yellow
Recording level indication
Incoming signal level indicator
REC LEVEL
STANDBY
TR-1
DISPLAY
COMPACT DISC PLAYER
DUAL OPTICAL OUTPUT
STANDBY/ON