Onkyo HT-RC470 Stereo Receiver User Manual


 
Appendix
En-80
There’s no sound
There’s no video
The AV receiver’s remote controller doesn’t
control my iPod/iPhone
The AV receiver unexpectedly selects my
iPod/iPhone as the input source
iPod/iPhone doesn’t work properly
There’s no sound
The Zone 2 speakers produce no sound
Can’t access the server or Internet radio
Playback stops while listening to music files on
the server
Can’t connect to the AV receiver from a Web
browser
If you cannot operate it, you will need to enter the
appropriate remote control code.
72
To control another manufacturer’s component, point
the remote controller at that component.
73
To control an Onkyo component that’s connected via
, point the remote controller at the AV receiver.
Be sure to enter the appropriate remote control code
first.
74
To control an Onkyo component that’s not connected
via , point the remote controller at the component.
Be sure to enter the appropriate remote control code
first.
74
The entered remote control code may not be correct.
If more than one code is listed, try each one.
RI Dock for iPod/iPhone
Make sure your iPod/iPhone is actually playing.
Make sure your iPod/iPhone is properly inserted in
the Dock.
Make sure the AV receiver is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod/iPhone.
Make sure that your iPod/iPhone model’s TV OUT
setting is set to On.
Make sure the correct input is selected on your TV or
the AV receiver.
Some versions of the iPod/iPhone do not output
video.
Make sure your iPod/iPhone is properly inserted in
the Dock. If your iPod/iPhone is in a case, it may not
connect properly to the Dock. Always remove your
iPod/iPhone from the case before inserting it into the
Dock.
The iPod/iPhone cannot be operated while it’s
displaying the Apple logo.
Make sure you’ve selected the right remote mode. 71
When you use the AV receiver’s remote controller,
point it toward your AV receiver.
If you still can’t control your iPod/iPhone, start
playback by pressing your iPod/iPhone model’s Play
button. Remote operation should then be possible.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone, some buttons may
not work as expected.
Always pause iPod/iPhone playback before selecting
a different input source. If playback is not paused, the
Direct Change function may select your iPod/iPhone
as the input source by mistake during the transition
between tracks.
Try reconnecting your iPod/iPhone.
Zone 2/3
Only components connected to analog inputs can be
played in Zone 2/3.
Powered Zone 2 cannot be used if “Speakers Type
(Front)” is set to “Bi-Amp”.
52
Music Server and Internet Radio
Check the network connection between the AV
receiver and your router or switch.
93
Make sure that your modem and router are properly
connected, and make sure they are both turned on.
Make sure the server is up and running and
compatible with the AV receiver.
94
Check the “Network”settings. 65
Make sure your server is compatible with the AV
receiver.
94
If you download or copy large files on your
computer, playback may be interrupted. Try closing
any unused programs, use a more powerful computer,
or use a dedicated server.
If the server is serving large music files to several
networked devices simultaneously, the network may
become overloaded and playback may be interrupted.
Reduce the number of playback devices on the
network, upgrade your network, or use a switch
instead of a hub.
If you’re using DHCP, your router may not always
allocate the same IP address to the AV receiver, so if
you find that you can’t connect to a server or Internet
radio station, recheck the AV receiver’s IP address on
the “Network” screen.
65
Check the “Network” settings. 65