Filter
Top Products
Controlling Other Components
En-75
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
INPUT MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
`33101:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the
*1
(limited to some models). The component must be able to
receive remote control commands via and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
`32910/33101/33501/31612:
Blu-ray Disc/DVD player with
*1
The supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ TV operation
■ Blu-ray Disc player / HD DVD player operation
Press the appropriate REMOTE
MODE button first.
Available buttons
, INPUT, TV VOL /
Number: 1 to 9, 0
GUIDE
Number: +10
*1
/ / /
ENTER
DISPLAY
MUTING
SETUP CH +/–
, , , , ,
,
*1
PREV CH
RETURN
A
(Red)
*1
AUDIO
*1
B
(Green)
*1
CLR
C
(Yellow)
*1
D
(Blue)
*1
Available buttons
TOP MENU
SOURCE
/ / /
ENTER
DISPLAY
MUTING
SETUP CH +/–
, , , , ,
,
DISC +/–
MENU
A
(Red)
RETURN
B
(Green) AUDIO
*1
C
(Yellow)
CLR
D
(Blue)
Number: 1 to 9, 0
Number: +10
*1