Onkyo HT-R410 Stereo Receiver User Manual


 
23
PRESET 2/3
TUNER
PRESET/ADJUST /£
MEMORY
FM MODE
Selecting preset stations
Before selecting preset stations, you need to preset the radio
stations. See Presetting radio stations on the left column of this
page.
1. Press TUNER to switch the input source to the
tuner.
FM or AM appears in the display.
The band selected in this step will not affect the next step.
Presetting radio stations
You can preset up to 30 stations.
1. Tune in the radio station you wish to preset
(refer to the previous page).
2. Press MEMORY.
The MEMORY indicator lights and the preset number starts
flashing in the display.
Listening to the radio
3. While the MEMORY indicator is lit (for about
8 seconds), press PRESET/ADJUST /£ to
select the preset number.
4. Press MEMORY.
The radio station is registered to the preset channel.
To register another preset station, repeat steps 1 to 4.
2. Press PRESET 2/3 on the remote controller or
PRESET/ADJUST /£ on the unit repeatedly
to select the preset number of the desired radio
station.
Erasing a preset station
1. Select the preset channel you wish to erase.
2. Press FM MODE while holding down MEMORY.
The selected preset channel will be erased.