Filter
Top Products
8
Controls & Connectors
For detailed information, refer to the pages in parenthe-
sis.
A
STANDBY/ON button (14)
This button is used to set the DX-C390 to On or
Standby. For models with a POWER switch, this
button has no effect unless that POWER switch is
set to ON.
B
STANDBY indicator (14)
This indicator lights up when the DX-C390 is in
Standby mode.
C
POWER switch (not North American model)
(14)
This is the main power switch. When set to OFF, the
DX-C390 is completely shutdown.
D
REPEAT button (21)
This button is used with the Repeat function.
E
RANDOM button (21)
This button is used with the Random function.
F
DIMMER button (15)
This button is used to adjust the display brightness.
G
DISPLAY button (19)
This button is used to display elapsed, remaining,
and total time information about the current disc or
track and various information about MP3 tracks.
H
Remote control sensor (11)
This sensor receives control signals from the remote
controller.
I
[
] button (14)
This button is used to open and close the disc tray.
J
DISC SELECT buttons (15)
These buttons are used to select discs. Playback
starts automatically when a disc is selected with one
of these buttons.
K
PLAY/PAUSE [ ]/[ ] button (15, 16)
This button is used to start and pause playback.
L
STOP [ ] button (16)
This button is used to stop playback.
M
[ ]/[ ] & FOLDER
[]
/
[]
buttons (16, 17)
These buttons are used to select the previous and
next tracks and to navigate folders on MP3 discs.
N
[ ]/[ ] & FOLDER
[]
/
[]
buttons (16, 17)
These buttons are used for fast reverse and fast for-
ward and to navigate folders on MP3 discs.
O
DISC SKIP button (14, 15)
This button is used to turn the disc tray when load-
ing or removing discs and to select discs for play-
back.
Front Panel
1245 6 7 8 9 J
KLMNO
North American Model
Display
Disc tray light Disc tray
Other Models
3
12