Onkyo A-9755 Stereo Amplifier User Manual


 
5
Supplied Accessories
Make sure you have the following accessories:
In catalogs and on packaging, the letter added to the end
of the product name indicates the color of the
A-9755/A-9555. Specications and operation are the
same regardless of color.
Plug the supplied power cord into this AC INLET.
Do not use a power cord other than the one supplied
with the A-9755/A-9555. The power cord supplied is
designed for use with the A-9755/A-9555 and should
not be used with any other device.
Never have the power cord disconnected from the
A-9755/A-9555 while the other end is plugged into
the wall outlet. Doing so may cause an electric shock.
Always connect by plugging into the wall outlet last
and disconnect by unplugging from the wall outlet
rst.
Notes:
If the remote controller doesnt work reliably, try
replacing the batteries.
Dont mix new and old batteries or different types of
batteries.
If you intend not to use the remote controller for a
long time, remove the batteries to prevent damage
from leakage or corrosion.
Flat batteries should be removed as soon as possible
to prevent damage from leakage or corrosion.
Connecting the Supplied Power Cord
Remote controller & two batteries (AA/R6)
A-9755: RC-636S
A-9555: RC-627S
Power cord
(Power cord varies from
country to country)
To wall outlet
DO NOT connect the
power cord at this
time.
Installing the Remote Controllers
Batteries
1
To open the battery compartment, press
the small hollow and slide open the cover.
2
Insert the two supplied batteries (AA/R6)
in accordance with the polarity diagram
inside the battery compartment.
3
Slide the cover shut.