Onkyo A-9755 Stereo Amplifier User Manual


 
15
Enjoying Audio Sources—Continued
Muting the A-9755/A-9555 (remote
controller only)
You can temporarily mute the output of the
A-9755/A-9555.
Using Headphones
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the A-9755/A-9555s PHONES jack for
private listening.
Notes:
Always turn down the volume before connecting your
headphones.
All connected speakers are turned off while the head-
phones plug is inserted in the PHONES jack.
The headphones output no sound while the MAIN IN
function is on.
Listening to Components
1
Turn the input selector to select
the component that you want to
listen to.
LINE: Select to listen to the compo-
nent connected to the LINE jacks.
HDD: Select to listen to the compo-
nent connected to the HDD jacks.
PHONO: Select to listen to the turnta-
ble connected to the PHONO jacks.
CD: Select to listen to the component
connected to the CD jacks.
TUNER: Select to listen to the compo-
nent connected to the TUNER jacks.
TAPE: Select to hear the component
connected to the TAPE IN jacks.
MD: Select to listen to the component
connected to the MD IN jacks.
When selecting with the remote con-
troller, use the INPUT [ ]/[ ] but-
tons.
2
Start playback on the selected
component.
3
To adjust the volume, use the
A-9755/A-9555s Volume control,
or the remote controllers VOL-
UME [ ]/[ ] buttons.
Turn Volume control clockwise to
increase the volume or counterclock-
wise to decrease the volume.
Note:
When using the A-9755 as a power
amplier (MAIN IN function), the
Volume control has no effect.
MUTING
INPUT
VOLUME
/
/
Input selector
VolumeSPEAKERS selector
A-9755/
A-9555
Remote
controller
A-9755/
A-9555
Remote
controller
1
Press the remote controllers
[MUTING] button.
The A-9755/A-9555 is muted. The
Volume indicator ashes.
To unmute the A-9755/A-9555,
press the [MUTING] button again.
Notes:
The Mute function will be cancelled
if the remote controllers VOLUME
buttons are pressed or the
A-9755/A-9555 is set to Standby.
When using the A-9755 as a power
amplier (MAIN IN function), the
Muting function is disabled.