Filter
Top Products
9
IPRD SERIES OWNER’S MANUAL
IPRD8 8” In-ceiling Speaker
Woofer: 8” Woven Kevlar cone, rubber surround, 25oz Magnet, 1.25”
voice coil, Bumped back plate, vented pole piece
Tweeter: 1” Titanium Dome tweeter, Ferro-fl uid cooled, Neodymium
magnet, Swivel 30 degrees
Crossover: Phonalic PCB board, 18dB woofer section, 18dB tweeter
section, polymide auto protective reset switch for tweeter
Attenuation switches: +/- 3dB on woofer and tweeter
Frequency response: 45Hz~22KHz
Sensitivity: 89dB
Recommended amplifi er power: 10~150W
Impedance: 4ohm / 8ohm switch-able on PCB
Cut out size: 9.64”
Weight (pair pack): 15.75 lbs
Dimensions (pair pack): 13.75”(H) X 13”(W) X 17.75”(L)
Paint mask and cut out template included