Filter
Top Products
3
IPRD SERIES OWNER’S MANUAL
IP Series Speaker Installation Guide
At OMAGE, we continuously strive to improve our products. For this reason, we reserve the right to change product
specifications without notice. The information concerning product specifications and instructions in this manual do not
necessarily set forth all technical or other specifications of OMAGE products. Additional information can be obtained
on-line at www.omageusa.com
IP Series Speaker Placement
With OMAGE., realizing maximum sound performance is always the goal. The pivoting tweeters in OMAGE speakers are
able to compensate for unusual placements. However, placing speakers at equal distance from the intended listening area
and along a common wall is generally recommended as the ideal acoustical set-up. This helps to ensure the best stereo
effect. Where the intended listening position may vary widely, speaker placement may be wherever is most convenient.
OMAGE custom install speakers are designed to function in any standard wall, ceiling or drop ceiling.
DISTRIBUTED AUDIO PLACEMENT
OMAGE speakers posses extremely smooth predictable off-axis frequency response. The chart below shows how far
apart the speakers can be placed in a distributed audio system. The valculations are based on +/- 45 degrees of coverage
from the speaker, and listeners ear heights of 62” for standing and 40” for seated.
Speakers spacing Standing Listener Seated Listener
8 foot ceiling 5.7’ 9.5’
10 foot ceiling 9.7’ 13.5’
12 foot ceiling 13.7’ 17.5’
14 foot ceiling 17.7’ 21.5’
2 CHANNEL AUDIO PLACEMENT
In a standard two channel audio system, the speakers should be separated approximately 6 - 10 feet apart. If possible, the
left and right speakers should be located the same distance from the listening position.
HOME THEATER PLACEMENT
When using the speakers as a rear channel speaker, the speakers should be located from 2 to 6 feet behind the main
listening position. The speakers should be separated approximately 6 to 10 feet apart.