Filter
Top Products
8
IPRD SERIES OWNER’S MANUAL
IP Series In-Ceiling Speaker Specifi cations
IPRD6.5 6.5” In-ceiling Speaker
Woofer: 6.5” Woven Kevlar cone, rubber surround, 18oz Magnet, 1”
voice coil, Bumped back plate, vented pole piece
Tweeter: 1” Titanium Dome tweeter, Ferro-fl uid cooled, Neodymium
magnet, Swivel 30 degrees
Crossover: Phonalic PCB board, 18dB woofer section, 18dB tweeter
section, polymide auto protective reset switch for tweeter
Attenuation switches: ± 3dB on woofer and tweeter
Frequency response: 48Hz~22kHz
Sensitivity: 88dB
Recommended amplifi er power: 10~125W
Impedance: 4ohm / 8ohm switch-able on PCB
Cut out size: 7.95”
Weight (pair pack): 11 lbs
Dimensions (pair pack): 15.5”(H) X 11.5”(W) X 11”(L)
Paint mask and cut out template included
IPRD6.5ST 6.5” In-ceiling Stereo Speaker
Woofer: Dual 1” voice coil, 6.5” Woven Kevlar cone, rubber surround,
18oz Magnet, Bumped back plate, vented pole piece
Tweeter: 2 x 1” Titanium Dome tweeter, Ferro-fl uid cooled, Neodymium
magnet, Swivel 30 degrees
Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter
section, polymide auto protective reset switch for tweeter
Frequency response: 48Hz~22kHz
Sensitivity: 88dB
Recommended amplifi er power: 10~125W per channel
Impedance: 8 ohm
Cut out size: 7.95”
Weight (pair pack): 6 lbs
Dimensions (pair pack): 8”(H) X 11”(W) X 11”(L)
Paint mask and cut out template included