Filter
Top Products
If you select “RGB”, the following will happen.
● The Eye-Trek display will be in black and white, and there will be no sound.
● When you play back a disk, the Eye-Trek display may have static or distortions, but this is not a
malfunction. Remember to take the disk out of the disk tray before changing the setting to “Y Cb/Pb Cr/Pr”.
ENGLISH
E-19
Browser
System Configuration
Enter Version
Ņ
Display the “PlayStation®2” main menu on the Eye-Trek using the “PlayStation®2”
analog controller. (For more details, see “Using the main menu” in the “PlayStation®2”
instruction manual.)
When the main menu appears, perform the following steps.
1 Select “System Configuration” using the “PlayStation®2” analog controller’s up and down
directional buttons, then press the button (Enter).
● Selected items are highlighted.
2 Select “Component Video Out” using the “PlayStation®2” analog controller’s up and down
directional buttons, then press the button (Enter).
3 Select “Y Cb/Pb Cr/Pr” using the “PlayStation®2” analog controller’s right and left
directional buttons, then press the button (Enter).
“PlayStation®2” SYSTEM CONFIGURATION
Press the
⅜
button (Back) on the “PlayStation®2” analog controller to return to the main
menu.
Press the (open) button on the front of the “PlayStation®2” main unit, then insert a
disk.
Press the (standby) /RESET button on the front of the “PlayStation®2” main unit.
( Refer to the “PlayStation®2” instruction manual to play back the disk.)
Once an image appears on the Eye-Trek, go to “ADJUSTING THE AUDIO/VIDEO” in this
instruction manual. (੬ pg. 21)
1
2
3
4
System Configuration
Component Video Out
Y Cb/Pb Cr/Pr RGB
Enter Back