Filter
Top Products
SPECIFICATIONS
21
Input Impedance ........................................UH-1000: 10 K Ohms
UB-1000: 500 K Ohm (Instr.),
10 K Ohms (Lav), 20 K Ohms (HM)
Controls ......................................................UH-1000: On/Off switch, Mute, Set,
and UP or DOWN buttons
UB-1000: On/Off switch, Mute, Set,
and UP or DOWN buttons, 3-Pin Mini
XLR input for: lavalier, head mic,
or music instrument
LED Indicator ............................................Unit “ON” (single flash), Low Battery Alert
(steady), Mute (flashing)
Connectors ................................................UH-1000: None
UB-1000: Mini 3-Pin XLR USB Port,
connecting cord supplied with receiver
Antenna Type ............................................UH-1000: Integral
UB-1000: External permanent, 3 inch
Battery Type ..............................................2 X AA alkaline
Battery Life ................................................8-12 hours nominal
Dimensions ................................................UH-1000: 10.75” x 1.625” dia
(27.30 cm x 4.13 cm).
UB-1000: 3.875” x 2.5” x .875” [L / W / H]
(9.84 cm x 6.35 cm x 2.22 cm)
Weight (w/o batteries) ................................UH-1000: 10.8 oz (.306 Kg.)
UB-1000: 5.7 oz (.161 Kg.)
U.S.) If you are experiencing operational problems with your system, check out
the support page on the Nady website: www.nady.com for help and for
contacting the Nady Service Department. Should your Wireless System require
service, you must contact the Nady Service Department at (510) 652-2411 for a
Return Authorization (R/A) Number and a service quote (if out of warranty).
Make sure the R/A Number is clearly marked on the outside of package.
Cashiers’ check or money order is enclosed (if not prepaid with credit card), and
ship the unit prepaid to: Nady Systems, Inc., Service Department, 6701
Shellmound Street, Emeryville, CA 94608. Include a brief description of the
problem you are experiencing. For service of a unit under Warranty follow the
instructions of your Warranty Card regarding Warranty Service.
(International) For service, please contact the NADY distributor in your country
through the dealer from whom you purchased this product.
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF, AS THAT WILL
VOID YOUR WARRANTY.
SERVICE INFORMATION
For best operation, the receiver should be placed at least 1 meter above the
ground and 1 meter away from a wall or metal surfaces. The transmitter should
also be at least 1 meter away from the receiver. Keep antennas away from
noise source such as motors, automobiles, neon light, signal processors,
computer, as well as large metal objects.
INSTALLING ANTENNAS
Install antennas by connecting the two antennas included with your system to
the two each RF screw-on connectors located on the back of your
UHF-1000/2000 receiver.
RECEIVER SETUP
OPERATING INSTRUCTIONS
A
NT.A
ANT
.B
D
C
I
N
1
2V
-
15V
B
AL
A
N
C
E
D
AF
O
U
T
MI
C
L
I
N
E
B
AL
A
N
C
E
D
AF
O
U
T
MI
C
L
I
NE
U-1000 RECEIVER (FRONT)
1 2
3
6
7 8 9
4 5
10
U-1000 RECEIVER (BACK)
11 12
13 14 15
16
U-2000 RECEIVER (FRONT)
U-2000 RECEIVER (BACK)
1 2
3
6
7 8 9
10
4 5
11 12
13 14 15
16
U-1000, U-2000 Receiver
1. Slot for front mount antenna
2. Power switch
3. LCD display
4. UP button
5. DOWN button
6. MENU
7. SET
8. SCAN
9. USB port
10. Slot for front mount antenna
11. Antenna B socket
12. MIC / Line level switch
13. Unbalanced out
14. Balanced out
15. DC IN jack
16. Antenna A socket
4
2