Filter
Top Products
13
OPERATING INSTRUCTIONS
UB-1000 Bodypack Transmitter
2. “NADY UB-100” (can not be edited)
3. User Name
The User Name field has 8 character spaces. Choose
from upper and lower case alphabet, 27 special characters (including space),
and 10 numbers.
In the User Name Menu, hold the SET (10) button for 3
seconds. The curser will blink, press the UP (11) or
DOWN (12) buttons to cycle the character selection, press SET to advance to
the next location. After finishing the edit, hold the SET button until the curser
stops blinking.
4. Group and Channel
Choose the operating frequency by selecting one of the 24 Groups and one of
the 40 Channels in each group. The first two top digits on the left are the Group
and the second top two digits to the right are the
Channel. The battery status is also displayed.
In the Group and Channel Menu, hold the SET (10)
button for 3 seconds.
The curser will blink in the Group selection and the frequency is displayed, use
UP (11) or DOWN (12) buttons to cycle the Group selection. Press SET (10),
the curser will advance to the Channel selection, press the UP (11) or DOWN
(12) buttons to cycle the selections. After finishing the edit, hold the SET (10)
button until the curser stops blinking.
5. User Edit
The user edit memory stores 40 selections of channel frequencies. If the
frequencies are not between 721.000-745.975 MHz for Band-1 or 795.000-
819.975 MHz for Band-2 they will not be saved.
In the User Edit Menu, hold the SET (10) button for 3
seconds.
The curser will blink and the memory location and frequency are displayed,
press the UP (11) or DOWN (12) buttons to cycle the memory locations. Press
the SET button, the curser will blink in the frequency, press the SET (10) button
to cycle the frequency digits. Press the UP (11) or DOWN (12) buttons to cycle
the frequency assignment. After finishing the edit, hold the SET (10) button until
the curser stops blinking, the User Name menu will appear.
NADY
UB-1000
USER NAME
CF: 01 - 01
CF: 01 - 01
721.000
EDIT - 01
721.000
12
OPERATING INSTRUCTIONS
UB-1000 Bodypack Transmitter
1. Antenna
2. Battery weak / Audio MUTE indicator
3. Audio MUTE switch
4. Mini-XLR connector
5. Power ON/OFF switch
6. LCD display
7. Mini USB port
8. Cover release button
9. Battery Compartment
10. SET button
11. UP button
12. DOWN button
1
4
1
2
3
6
10
12
11
9
5
8
7