Filter
Top Products
GB
11
REAR PANEL
ATTENTION!
Please make all connections to your S170 preamplifier with the unit
powered off or unplugged. (It is equally wise to power-down or
unplug all associated components while making or breaking any
signal or AC power connections.)
1 COMPOSITE VIDEO IN 1-6: Connect Video Inputs 1-6 to composite-
video from source components (see "Source Setup," below).
2 COMPOSITE VIDEO OUT 4-6 OUT; MON OUT: Connect to
composite-video record-inputs of recording components; connect
MON OUT to the composite-video input of the video monitor/TV.
3S VID1 IN - S VID6 IN: Connect Video Inputs 1-6 to S-Video from
source components (see "Source Setup," below).
4S VID4 OUT - SVID6 OUT; MON OUT: Connect to S-Video record-
inputs of recording components; connect MON OUT to the S-Video
input of the video monitor/TV.
5 COMPONENT VIDEO IN (upper), OUT (lower): Connect inputs to
component-video signal or wide-band component video from a
source component such as a DVD player or HDTV tuner; connect
outputs to the component-video inputs of the video monitor/TV. Be
sure to observe consistency in connecting the Y, CB, and CR jacks to
the corresponding sources/inputs (see "Source Setup," below).
6 NAD LINK IN/OUT: Connect to the corresponding NAD Link jacks
(input to output and vice versa) of compatible NAD components (see
"NAD Link," below).
7 DIGITAL 1-3; DIGITAL IN; DIGITAL OUT: Connect DIGITAL 1-3 to
coaxial S/PDIF-format digital sources such as CD or DVD players;
connect DIGITAL IN to a high-quality S/PDIF-format source via BNC
cabling; connect DIGITAL OUT to the coaxial S/PDIF digital input of a
recording component such as a CD recorder, DAT deck, or computer
soundcard (see "Source Setup," below).
8 OPTICAL DIGITAL IN 1-2; DIGITAL IN; OPTICAL DIGITAL OUT:
Connect OPTICAL DIGITAL 1-2 to optical S/PDIF-format digital sources
such as CD or DVD players; connect OPTICAL DIGITAL OUT to the
optical S/PDIF digital input of a recording component such as a CD
recorder, DAT deck, or computer soundcard.
9 RS-232: Connect to the RS-232 serial port of a home-automation
system or personal computer (see "System Integration," below).
10 VIDEO 1-6 Analog Audio Inputs: Connect to stereo analog outputs
of audio-video sources (see "Source Setup," below).
11 VIDEO ANALOG REC OUT 4-6: Connect to stereo analog inputs of
recording audio-video components such as videocassette recorders.
12 CD, AUX, TUNER Inputs: Connect to stereo analog outputs of audio
components.
13 TAPE MONITOR IN/OUT: Connect OUT to the stereo analog inputs,
and IN to the outputs of an audio recording components such as a
cassette deck or CD recorder, or of an analog audio processor such as
a stereo equalizer.
14 MULTISOURCE OUT: Connect to the inputs of the stereo amplifier
(integrated amp, receiver) that will power the remote-zone's
loudspeakers (see "Listening in a Remote Zone," below).
15 PREAMP ANALOG 7.1 OUTPUTS: Connect L, R, and CENTER to the
channel inputs of the power amplifier(s) driving the front, channels;
connect LS and RS to the power amplifier driving the surround
speakers and LEFT B and RIGHT B to that driving the surround-back
speakers (if any); connect sub to the line input of a powered
subwoofer or to the amplifier driving a passive sub (if any).
16 EXTERNAL 5.1 INPUTS: Connect to the corresponding analog audio
outputs of a multichannel source component such as a DVD-Audio or
multichannel SACD player. There is no bass-management or other
processing available to these inputs; see "Selecting Sources," below.
17 12V TRIGGERS: Connect to the 12-volt trigger inputs of compatible
components such as power amplifiers and projector lifts; see "Trigger
Setup," below.
18 AC power inlet: Connect to the supplied IEC-standard removable
AC power cord or a compatible cord.