Mitsubishi Electronics 838 SERIES Home Theater System User Manual


 
54 4. TV Menus
For assistance call 1(800) 332-2119
Sound Global
Settings in this menu apply to all left and right inputs.
Analog Audio Out
These settings affect audio from the AUDIO OUTPUT jacks.
Fixed Use with an analog A/V receiver. Control volume from the A/V receiver. The
volume of the audio output signal is fixed and is unaffected by the TV’s volume
control.
Variable Use with headphones. Adjust headphone volume using the TV’s volume controls.
When set to Variable, the audio output signal is adjustable from the TV’s volume
controls.
Rear 838 Series. Sends left and right rear audio to external speakers.
Use when
supplementing the TV’s speaker array with external rear speakers. See “External Rear
Speakers,” page 44.
Subwoofer 838 Series. Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer
is connected.
Center Channel 838 Series. On allows the TV’s speakers to complement your external sound system as a
center channel. Set to Off if not in use. See “Using the TV Speakers as a Center Channel,”
page 27.
Sound Auto SP
838 Series. Performs auto calibration of the Sound Projector speaker array. See “Auto
Setup,” page 43.
Sound SoundPro
838 Series.
Lets you set up the Sound Projector speaker array manually. See page 41.
Sound, continued