Filter
Top Products
3. TV Features 35
For assistance call 1(800) 332-2119
Original 3D Video Options
(TV Software Versions 012.05 and earlier)
To display 3D gaming or 3D cinema content, your
Mitsubishi TV requires:
• A compatible 3D source device outputting a 3D
signal in one of these formats:
- Checkerboard format, 1080p, 60-Hz; (lower
resolutions may be supported but will not fill the
screen)
- Side-by-Side format, 1080p, 24/30/60 Hz; 720p,
60 Hz
• Active-shutter 3D glasses, DLP link type or IR
emitter type with matching emitter
Initial Setup
See the instructions on page 33.
Watching 3D Video
Note: Active 3D glasses are required.
1.
Press
INPUT
.
2.
Highlight the icon for the 3D video device and press
ENTER
.
3.
Press
MENU
and select the Picture > 3D Mode
menu.
4.
Select On
for 3D Mode
. The On setting will be
memorized for the current input when you exit this
menu.
5.
Select the Source Format. If your source device
outputs an unsupported signal format see “Notice
Concerning 3D Format Compatibility” on this page.
6.
For Glasses Control, select the control type for
your 3D glasses, either IR Emitter or DLP Link.
Use the Picture > 3D Mode menu to enable 3D video.
7.
Press
EXIT
to close the menu.
8.
If the image does not appear correct
(e.g., objects
appear to be moving in instead of out),
open the
Picture > 3D Mode menu and set Glasses L-R to
Reverse.
Watching Regular (non-3D) Video
The 3D Mode setting is memorized for each input.
When you want to watch non-3D video on the input
selected above, you can
• Open the Picture > 3D Mode menu and set 3D
Mode to Off.
• Press the
TOOLS
key and select 3D option 7.
Notice Concerning 3D Format Compatibility
(TV Software Versions 012.05 and earlier)
Mitsubishi 3DTVs (738 and 838 series) currently
support the side-by-side 3D signal format. For
support of other 3D formats, such as top-bottom and
frame packing (3D Blu-ray standard), Mitsubishi 3D
TVs will require the use of a 3D source device that
outputs the 3D checkerboard format or a 3D source
device coupled with the Mitsubishi 3D adapter. In
all cases an emitter and matching 3D active shutter
glasses or DLP Link active shutter glasses are
required in order to view 3D content.
3D Video, continued
Which Software Version Is in My TV?
Press
MENU
to see your TV’s software version dis-
played in the lower left corner of the main menu.
Versions 012.05 and earlier carry a limited choice of
3D video options.
Important
This page describes 3D options offered with TV
software versions 012.05 and earlier.
• Toupgradeearliersoftwaretothecurrent
version, visit
http://www.mitsubishi-tv.com/3Dupgrade.html
•
Instructions for later software are on page 35.