Filter
Top Products
9d) Information Line - The row of 24 characters in the top line of the display indicates more detailed information about specific
functions and items such as: Preset names, Parameter names and Utility information.
9e) Parameter Data Sections - Immediately below the information line, are four parameter data sections. They correspond with knobs
<1> through <4> on the front panel. Each section displays the current value of the indicated parameter.
A LINK icon in each group tells whether the indicated Parameter is linked for expression control. When a parameter has been
modified, the CHANGED icon will appear under the parameter that has been modified and the <Store> button will light to
indicate a change has been made to the preset, but not stored.
9f) Input Level / Clip Meters / Tune Indicator- An Input Level and Clip meter is located in the bottom center of the display. This meter
shows the guitar signal level, and uses a peak detector action to display the highest levels at the input. The CLIP icon at the end of
the meter, indicates if the the input signal is being clipped at the Analog input section (pre-digital). The DIGITAL CLIP icon
indicates that there is clipping in the digital effects domain. This meter is also used to show note activity while the Millennium is in
Tuner Mode
9g) Effect Routing Matrix - The Effect Routing Matrix shows the signal flow of the currently selected preset through the amp and effect
sections. This matrix includes boxes that represent each effect module along with lines that indicate how those effects are connected to
inputs, outputs and each other. If an effect module is bypassed, a line appears through that module's box in the Matrix.
*When in FX Edit mode, the box that represents the currently selected effect module will flash.
9h) Speaker Cabinet Emulator Icon - When the SPEAKER icon appears in the display, this indicates that the Speaker Cabinet
Simulator is engaged in the XLR outputs located on the rear panel.
10) Preset/Effect Wheel - Changes Presets (in Preset Mode) or selects effect modules (in FX Edit Mode).
11 a-f) Function Buttons - These 6 buttons are used for primary function and edits of the Millennium. Their functions are as follows:.
11a) Preset Button - This button always puts the Millennium in Preset mode with a single press. Pressing the Preset button while in Preset
mode twice toggles between User and Factory presets.
11b) FX Bypass - This button bypasses all digital effects in the Millennium.
11c) Utility - This button enters the Utility mode of the Millennium.
11d) FX Edit - When pressed, the Millennium enters the Wah module or the last edited module.
11e) Assign - This button is used to assign parameters to the J-12 footswitches, MIDI control and dynamic modifiers.
11f) Store - This button is used to copy and/or store and name modified presets.
12) Mix/Page Knob - This button controls the effect mix level of the Millennium when it is in Preset mode. When the Millennium is in Edit
or Utility mode, this button takes you to the next or previous page of the selected menu.
Johnson Millennium
User Guide
Section -1 Introduction
5