Filter
Top Products
2. Turn <Page> knob to page 3 and the display will read:
3. Turn the function knob <4> to select the MIDI CC transmit channel. For example, select channel 10 and the display will now appear like
this:
4. To exit the Transmit channel assignment, press the <Preset> button.
Momentary Footswitch Assignment
The Millennium now has the ability to assign any footswitch of either the J-12 or Digitech Control One foot controllers to act as momentary
switches. This will give you the ability to toggle the value a parameter by a press /hold and release of the selected footswitch. The momentary
footswitch assignment can be done by performing the following procedure:
1. When the parameter for assignment has been selected, press the <Assign> button once. After you have selected the footswitch for
assignment, the display will appear something like this:
2. Now turn the <1> button to set the footswitch to either: Ont (On Toggle) or OnP (On Momentary).
3. Choosing the OnP setting will make the footswitch perform as a momentary footswitch. This means that the footswitch will toggle
the selected parameter while pressed, and once released, the parameter will return to its original value.
Fx:lvl FS # Min[ 96] Max
2
USER
Ont
1
CHANGEDLINK
F6
2
CHANGEDLINK
Off
3
CHANGEDLINK
100
4
CHANGEDLINK
PAGE
6
OF
19
WAH TUBE EQ
L/R OUTS
DIGITAL
#
b
GATE
BANK
MIDI: RcvChnl TransChnl
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
3
CHANGEDLINK
10
4
CHANGEDLINK
PAGE
3
OF
16
WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
MIDI: RcvChnl TransChnl
2
FACTORY USER
1
CHANGEDLINK
1
2
CHANGEDLINK
3
CHANGEDLINK
1
4
CHANGEDLINK
PAGE
3
OF
16
WAH TUBE EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
Section - 6 The J-12 Foot Controller
Johnson Millennium
User Guide
74