Filter
Top Products
Section-3 Editing Presets
Naming and Storing Presets
Before we get into editing presets and creating your own, let’s learn how to store changes so you won’t lose any modifications that you will
want to keep. The Store procedure allows you to re-name, relocate and save any modifications you have made to presets so that they can be
accessed easily later.
Naming the Preset
1. Press the <Store> button once. The display shows the current preset name (which may look something like this):
A cursor appears under the first character of the preset name.
2. Using the <Preset/Effect> wheel, change the character to the one you want in the selected position.
3. When the correct character is displayed in that position, use the <Page> knob to scroll the cursor to the next character you want to
change.
4. Use the <1> knob to change the letter’s case. The <2> knob is used to select numbers, The <3> knob is used to insert spaces. The
<4> knob is used to copy and paste characters.
5. To copy a character, position the cursor under the character you want to copy (using the <Page> knob), then turn the <4> knob
clockwise. To paste the copied character, position the cursor where you want to paste the character, then turn the <4> knob counter-
clockwise.
6. To abort the procedure, press any button.
Name: Clean Comp Delay
2
USER
%kHz
msdB
CAP
1
CHANGEDLINK
nbr
2
CHANGEDLINK
%kHz
msdB
InS
3
CHANGEDLINK
%kHz
msdB
COp
4
CHANGEDLINK
PAGE
1
OF
1
WAH TUBE EQ
L/R OUTS
DIGITAL
#
b
GATE
BANK
Johnson Millennium
User Guide
Section - 3 Editing Presets
21