Filter
Top Products
26
USING THE DSP
LOUDSPEAKERS
Adjusting the volume
The DSP loudspeakers adjust the volume in precise steps of 1dB, where 9dB
is equivalent to doubling the loudness, and can be varied in the range 1 to
99dB.
When you first connect power to the DSP loudspeakers the volume is set to
65, which is similar to the midway position of the rotary volume control on
a conventional preamplifier.
To change the volume
• Press the red A or V keys on the remote.
As you adjust the volume setting the display will show the current volume
level.
For example:
Radio 55
To mute (attenuate) the sound
• Press Mute on the remote.
The display will show:
Muted
.
To restore the sound
• Press Mute again on the remote.