Filter
Top Products
Using Only One Power Supply
You may have noticed a connection on the back of
your Stage labeled ‘Power Out’. The use of this connec-
tion will allow you to daisy-chain up to five low-voltage
MartinLogan products and eliminate the need for multiple
low-voltage power supplies.
A variety of low voltage interconnect cables may be pur-
chased at your local MartinLogan dealer. Please ask them
about options to fit your specific needs.
To use this connection option choose a primary speaker
(whichever speaker is most convenient) and connect it as
instructed in the ‘Low-Voltage Power Connection’ section
on the previous page. To attach additional speakers, run a
low-voltage interconnect cable from the ‘Power Out’ to the
next speaker’s ‘Power In’ (see figure 2). Cable not included.
When you first begin to play your Stage speaker, it will
sound a bit bass shy. This is due to the high-quality, long-
life components used in our woofer. Our custom made,
butyl surround woofer requires at least 80 hours of
break-in at 90 dB (moderate listening levels) before any
critical listening. The break-in requirements of the cross-
over components (and, to a lesser degree, the electrostatic
transducer) are equal.
8 Connections
Figure 2. Connecting power to multiple speakers using one power supply.
Break-In