Filter
Top Products
8 Mounting the Fresco On A Wall or Ceiling
Required hardware (included):
(6) M4 screws
Required tools (included):
2.5mm Allen tool
1 Prepare a flat surface with padding and sheets to pro-
tect the speaker as you work on it. Remove the Fresco's
grill cloth and carefully place the Fresco face down on
the work surface, using books or pieces of cardboard
to keep the speaker from rocking.
2 Using a 6mm Allen tool loosen the 2 cap nuts (see fig-
ure 12).
3 Rotate the wall bracket away from the cabinet bracket
(see figure 13).
4 Align the 6 holes in the Fresco's wall mounting bracket
with the holes on the back of the Fresco's cabinet.
Please note that the wall bracket should lie flat against
the Fresco cabinet with the hinges along the flat,
straight edge of the cabinet (see figure 14).
5 Using a 2.5MM Allen tool install the 6 screw that
attach the cabinet bracket and firmly tighten them (see
figure 15).
Installing the Bracket Assembly
Figure 12. Installing the bracket assembly on the Fresco cabinet—step 2.
Figure 13. Installing the bracket assembly on the Fresco cabinet—step 3.