MartinLogan Fresco Speaker System User Manual


 
NOTE: MartinLogan recommends using 5 wall anchors to
secure each Fresco to a wall. During the installation, if any
of the screw/wall anchor positions are over a stud, it is
recommended to screw directly into the stud.
NOTE: To assure that your Fresco is safely wall mounted,
these instructions must be carefully followed. Study them
thoroughly before installing your Fresco's.
NOTE: The following instructions assume the mounting
surface is of standard wood frame and standard sheet rock
construction. If you wish to mount the Fresco to another
type of material, you should consult a bonded contractor.
WARNING! Installing the Fresco on a wall requires
only 1 person, but an assistant will be helpful.
The bracket assembly shipped with the Fresco
loudspeaker is designed for use only with the
Fresco. Use with other appliances may result in
instability causing possible injury. To prevent injury,
this apparatus must be securely attached to the
wall in accordance with the installation instructions.
Which Way Should It Rotate?
The bracket assembly supplied with the Fresco allows the
speaker to mount flat against a wall and pivot up to 90°.
Depending on the installation locations, the Fresco on-wall
bracket will need to be modified to allow either right/up or
left/down rotation (see figure 3 and 4). The configuration of
Fresco’s bracket assembly is identical for right and up
rotation and is identical for left and down rotation.
Mounting the Fresco On A Wall or Ceiling 5
MOUNTING THE FRESCO ON A WALL OR CEILING
Figure 3. Vertical Installation. Rotation direction for various installtion locations.
Figure 2. The parts of the Fresco bracket assembly.
Figure 4. Horizontal Installation. Rotation direction for various installation locations.