6 Mounting the Fresco On A Wall or Ceiling
NOTE: Fresco’s bracket assembly consists of two main
parts: the wall bracket (attaches to the wall) and the cabinet
bracket (attaches to the Fresco). When correctly configured
the wall and cabinet brackets should each have one pin
installed—the wall bracket with an upward pointing pin in
the upper hinge, and the cabinet bracket with a downward
pointing pin in the lower hinge (see figures 5 and 6).
NOTE: When correctly installed in a vertical orientation, the
Fresco’s cabinet bracket (installed on the cabinet) should
slide down, onto the wall bracket (installed on the wall).
Each Fresco should be installed so that it can rotate to
point towards your listening position (see figure 3). Hold
each Fresco near it's desired location and try pivoting it to
assure that each speaker is correctly configured.
Preparing for Horizontal Installation
NOTE: Fresco’s bracket assembly consists of two main
parts: the wall bracket (attaches to the wall) and the cabinet
bracket (attaches to the Fresco). When correctly configured
each bracket should have one pin installed—the wall
bracket with a pin installed in the left hinge, pointing to
the left and the cabinet bracket with a pin installed in the
right hinge, pointing to the right (see figures 5 and 6).
NOTE: When the Fresco is correcty installed in a horizontal
orientation, gravity will pull on the speaker trying to rotate
down. The Fresco bracket assembly is designed in such a
way that the force of gravity will tighten the left cap nut and
prevent the speaker from rotating.
Each Fresco should be installed so that it can rotate to
point towards your listening position (see figure 4). Hold
each Fresco near it's desired location and try pivoting it to
assure that each speaker is correctly configured.
Preparing For Vertical Installation
INSTALLATION
Figure 5. Fresco’s bracket assembly configured for right/up rotation
Figure 6. Fresco’s bracket assembly configured for left/down rotation
Horizontal
(Up Rotation)
Vertical
(Right Rotation)
Horizontal
(Down Rotation)
Vertical
(Left Rotation)