Filter
Top Products
9 Place the Fresco onto the wall bracket and carefully slide
the Fresco into place (see figure 23).
10 Using a 6mm Allen tool, attach a washer and cap nut onto
each pin. Do not fully tighten the cap nuts (see figure 23).
11 Make the signal connections from the amplifier (see
‘Operation’, pages 4).
12 Rotate the Fresco to point at the listening position and
tighten the cap nuts (see figure 24).
13 Rotate the Fresco’s logo medallion, by removing the grill
cloth cover, gently pressing the medallion from behind
and turning it to the correct orientation (see figure 25).
12 Mounting the Fresco On A Wall or Ceiling