Filter
Top Products
28
Customizing Your Nº383
setup overview The Nº383 Integrated Amplifier has many provisions for custom-
tailoring the system’s operation to match your preferences. The method
for modifying any of these settings is to:
• press the
setup button on either the front panel or the re-
mote control to enter the setup mode, accessing the
Nº383’s menu system;
• navigate among different menu items using the select
knob
or the remote control’s select buttons;
• change the value of the selected menu item using either
the volume knob or volume +/– buttons on the remote.
• move down a level within a menu, or save the change by
pressing enter on either the front panel or the remote
control. (You can avoid saving an unwanted change by leav-
ing the menu without pressing enter, by pressing setup in-
stead. Within the menu system, setup acts like a “cancel”
button.)
This four-step process gives you extensive control over a wide variety of
setup options, and provides positive feedback that your changes have
been accepted and saved for future use.
the menu system The complete Nº383 Setup menu is shown below for your reference:
No383 Setup
Set Inputs
Set Input 1
Name=INPUT 1
Gain= +6 dB
Offset= 0.0
Rec.Out=NONE
Set Input 2 (repeats previous menu)
Set Input 3 (repeats previous menu, with +12 dB gain)
Set Input 4 (repeats previous menu)
Set Input 5 (repeats previous menu)
Teach IR
Mute = -20.0
MaxVol= 80.0
Trig.= 12v,L
Sw 1.05 1.02 (the software version numbers)