Filter
Top Products
32
Specifications
The correlation between published specifications and sonic quality is unreliable. A list
of numbers reveals virtually nothing. All technical measurements must be subject to
qualitative as well as quantitative interpretation.
Measurements of the Nº32 yield excellent results by any standards. However, only
those specifications that apply to its actual operation are included here.
■ Frequency response:
RIAA response ±0.1 dB
RIAA/IEC response +0.1, -0.3 dB
■ Gain: either 40 or 60 dB
■ THD + N:
2V out, 1 kHz test signal, 80 kHz measurement bandwidth less than 0.008%
■ Residual noise
ref to output w/500µV, 1 kHz at input, unweighted:
-69 dB
■ Input connectors: 2x Madrigal RCA per channel,
or 2x Neutrik XLR per channel
■ Input impedance: (user selectable)
Resistive: 3.3Ω, 5Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ
Capacitive: 0pF, 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01µF
Gold-plated, solderless terminals are available for user-installed load value,
inside phono module.
■ Input overload:
1kHz, 60 dB gain: 16mV on XLR, 8mV on RCA
1kHz, 40 dB gain: 160mV on XLR, 80mV on RCA
For more information, see your Mark Levinson dealer, or contact:
Madrigal Audio Laboratories, Inc.
P. O. Box 781
2081 South Main Street
Middletown, Connecticut 06457 USA
phone (860) 346-0896
fax (860) 346-1540
internet www.madrigal.com