Filter
Top Products
16
this , not
Warning: The cables must lie flat against phono preamp top
cover to slide in to Nº32 preamp.
8. Gently slide the left phono preamp module into the open-
ing in the left channel of the Nº32 preamp. Repeat for right
channel.
Do not force! The phono preamp modules should slide in easily.
If a phono preamp module does not slide in easily, remove it and
repeat step 7.
9. Reinstall the four screws that were removed from phono
option cover plate (
7
⁄64” hex key)
Please take care to avoid cross-threading these relatively small
screws.
10. Install two 10-32 socket head cap screws into floor of Nº32
Preamplifier, through the mounting tabs in the phono
preamp modules. (
5
⁄32” hex key)
These are the relatively heavy-duty screws that were supplied with
your Nº32 phono modules. The floor of the Nº32 has threaded
inserts waiting to accept these screws.