Filter
Top Products
19
Customizing Your Nº32
setup overview The Nº32 Preamplifier has many provisions for custom-tailoring the
system’s operation to match your preferences. The method for modify-
ing any of these settings is to:
• press the setup button on either the front panel or the re-
mote control to enter the setup mode, accessing the Nº32’s
menu system;
• navigate among different menu items using the select
knob or the remote control’s select buttons;
• change the value of the selected menu item using either
the volume knob or volume +/– buttons on the remote.
• move down a level within a menu, or save the change by
pressing enter on either the front panel or the remote con-
trol. (You can avoid saving an unwanted change by leaving
the menu without pressing enter, by pressing setup in-
stead.)
This four-step process gives you extensive control over a wide variety of
setup options, and provides positive feedback that your changes have
been accepted and saved for future use.
the menu system The complete Nº32 Setup menu is shown below for your reference:
No32 Setup
Set Inputs
Set Input 1
Name=INPUT 1
Gain= +6 dB
Offset= 0.0
Rec.Out=NONE
Set Input 2 (repeats previous menu)
Set Input 3 (repeats previous menu)
Set Input 4 (repeats previous menu, with +12 dB gain)
Set Input 5 (repeats previous menu)
Set Input 6 (repeats previous menu)
Set Input 7 (repeats previous menu)
Set Input 8 (repeats previous menu)
(continued next page)