Mark Levinson 433 Stereo Amplifier User Manual


 
2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Marking by the “CE” symbol (shown left) indicates
compliance of this device with the EMC (Electromag-
netic Compatibility) and LVD (Low Voltage Directive)
standards of the European Community.
Please read all instructions and precautions carefully and completely
before operating your Mark Levinson power amplifier.
1. ALWAYS disconnect the entire system from the AC mains before
connecting or disconnecting any cables, or when cleaning any
component.
2. This product must be terminated with a three-conductor AC mains
power cord that includes an earth ground connection. To prevent
shock hazard, all three connections must ALWAYS be used.
3. AC extension cords are not recommended for use with this product.
4. NEVER use flammable or combustible chemicals for cleaning
audio components.
5. NEVER operate this product with any covers removed.
6. NEVER wet the inside of this product with any liquid, or pour/
spill liquids directly onto this unit.
7. NEVER block airflow through ventilation slots or heat sinks.
8. NEVER bypass any fuse or replace any fuse with a value or type
other than those specified.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
Important Safety Instructions