Marantz SR8002 Stereo Receiver User Manual


  Open as PDF
of 94
 
ENGLISH
21
2.
Press the D4 (MACRO) direct button.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3.
Press the D1 (M-01) direct button .
The NAME is displayed.
4.
Press the D3 (NAME) direct button .
The “ ” blinks to indicate that rewriting is possible.
5.
Press the 5 numeric button to select M.
6.
Press the 2 cursor button to next.
The “ ” blinks to indicate that rewriting is possible.
7.
Press the 5 numeric button to select O.
8.
Repeat steps 6 and 7, and then enter V, I, E and
“ (space)”.
• To make changes in the text while entering
it, use the 1 or 2 cursor buttons to move to
the blinking section.
9.
After making the changes, press the OK cursor
button.
• To change the names of other macro
programs, repeat the procedure in steps 3
to 9.
10.
To exit, press the M button.
ERASING STEPS OF MACRO PROGRAMS
This example shows how to delete the TV and
INPUT steps from the following macro programmed
to M-01.
The program is changed from
DVD → PLAY → TIME → TV → INPUT → AMP →
AUTO
to
DVD → PLAY → TIME → AMP → AUTO.
1 2 3
LEARN
NAME
MACRO
USE
PAG E
1 23
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
4 5 6
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D4 (MACRO) direct button.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3.
Press the D1 (M-01) direct button.
4.
Press the D5 (EDIT) direct button.
The LCD displays DVD, and the step position is
indicated by
9
.
The programmed section is indicated by
&
.
5.
Press the 2 cursor button to display TV.
6.
Press the CLEAR button .
The LCD displays CLEAR, and TV and INPUT are
deleted.
When deleting steps from a macro program, the
operations performed for a source after switching to
the source are also deleted.
If the
CLEAR
button is pressed at the INPUT
position, only the INPUT step is deleted.
The
&
indicator for the step is also changed.
• To check the modifi ed steps, press the 1 or
2 cursor button.
7.
To exit, press the M button.
When fi nished, to change another macro program,
press the
OK
cursor button to return to the menu,
and then repeat the procedure for steps 3 to 6.
OVERWRITING STEPS IN MACRO PROGRAMS
This example shows how to change the macro
programmed to M-01 from
DVD → PLAY → AMP → AUTO
to
DVD → PLAY → TV → INPUT.
4 6 7
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D4 (MACRO) direct button.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3.
Press the D1 (M-01) direct button.
4.
Press the D5 (EDIT) direct button.
The LCD displays DVD, and the step position is
indicated by
9
.
The programmed section is indicated by
&
.
5.
Press the 2 cursor button so that AMP is
displayed.
6.
Press the TV source button.
TV blinks for 0.5 seconds.
7.
Press the D1 (INPUT) direct button.
INPUT blinks for 0.5 seconds.
TV and INPUT are overwritten.
• To check the modifi ed steps, press the 1 or
2 cursor button.
8.
To exit, press the M button.
When fi nished, to change another macro program,
press the
OK
cursor button to return to the menu,
and then repeat the procedure for steps 3 to 8.
INSERTING STEPS IN MACRO PROGRAMS
This example shows how to change the macro
programmed to M-01 from
DVD → PLAY → AMP → AUTO
to
DVD → PLAY → TV → INPUT → AMP → AUTO
4 6 8
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Hold down the M button for three seconds or
more.
The menu is displayed.
2.
Press the D4 (MACRO) direct button.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3.
Press the D1 (M-01) direct button .
4.
Press the D5 (EDIT) direct button .
The LCD displays DVD, and the step position is
indicated by
7
.
The programmed section is indicated by
&
.
5.
Press the 2 cursor button so that AMP is
displayed.
6.
Press the MEMO button.
7.
Press the TV source button.
TV blinks for 0.5 seconds
8.
Press the D1 (INPUT) direct button.
INPUT blinks for 0.5 seconds.
TV and INPUT are inserted.
9.
Press the OK cursor button.
• To check the modifi ed steps, press the 1 or
2 cursor button.
10.
To exit, press the M button.
When fi nished, to change another macro program,
press the
OK
cursor button to return to the menu,
and then repeat the procedure for steps 3 to 9.
CLEARING MACRO PROGRAMS
When clearing macros, the macros programmed to
the button are erased. Modifi ed macro names are
also returned to the factory default settings. This
example shows how to clear a macro with the name
MOVIE programmed to M-02.
1 4 5
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
LEARN
NAME
MACRO
USE
PAG E
123
4
1.
Press the M button for three second or more.
The macro menu is displayed.
2.
Press the D4 (MACRO) direct button .
The macro menu is displayed.
3.
Press the D2 (MOVIE) direct button while
holding down the CLEAR button.
4.
Press the D4 (YES) direct button to clear the
macro.
To cancel the clearing operation, press the
NO
(D5
button).
5.
To exit, press the M button.
When fi nished, to change another macro program,
press the
OK
cursor button to return to the menu,
and then repeat the procedure for steps 2 to 4.
 previous next