Marantz SR8000 Stereo Receiver User Manual


 
7
ENGLISH
8OHMS
MINIMUM 8OHMS
OPT
OUT
1
CTRL
MONITOR OUT
DIGITAL IN
L
SURR.
R
CENTER
SUB
WOOFER
OUT
DIGITAL
2
CTRL
SURR.
CENTER
FRONT
L
SPEAKERS
FRONT
PRE OUT
R
L
R
DIG–6
OUT
IN
DIG. OUT
DIG. OUT
RC-5
IN
OUT
VIDEO
REMOTE
MULTI
OUT
2
CTRL
1
CTRL
COAX
R
6CH INPUT
FRONT
WOOFER
SUB
CENTER
L
SURR.
DC CONTROL
S-VIDEO
DIG–5
DIG–4
DIG–3
DIG–2
DIG–1
8OHMS
8OHMS
SPEAKER SYSTEM
8 OHMS
AC OUTLET
120V 60 Hz
UNSWITCHED
200 W MAX
D - BUS
OUT
IN
NORMAL
INPUT
INVERT
OUTPUT
2 SYSTEM
RC-5
IN
OUT
REMOTE
CONT.
OUT
IN
REMOTE
CONT.
OUT
IN
Other Marantz
Equipment (RC-5)
LINE IN
Powered subwoofer
Marantz MA500 power amplifier
Subwoofer speaker
Set the switch to ”SYSTEM 2”
REMOTE CONTROL BUS CONNECTIONS
This unit is equipped with a remote control function.
By connecting this unit’s remote control jacks to a Marantz CD player
or tape deck equipped with remote control (RC-5) jacks, it allows
system remote control to operate.
Connect RC-5 OUT jack of SR8000 to REMOTE CONT. IN of other
Marantz equipment, i.e. CD player or Cassette deck, by using an RCA
pin cable.
Note:
If a component equipped with remote control (RC-5) jacks has an
INT/EXT switch on the rear panel, set the switch to EXT when using
the system control function.
(Connection example)
SR8000 rear panel
or MA500 rear panel CD player rear panel Tape deck panel
Controlling the power ON/OFF of a power amplifier connected to
the SR8000 through Marantz remote control
1. If you connect the MA500 power amplifier to the SR8000, set the
Bus System Selector switch of the MA500 to “System 2”.
Now the MA500 can be turned ON / OFF in synchronism with the
power ON / OFF of the SR8000.
Notes:
n Be sure to connect the remote control bus before the procedure
above.
Use this connection when using a sub-woofer speaker.
You can also connect a powered subwoofer.
CONNECTION FOR A SUBWOOFER