Filter
Top Products
11
ENGLISH
OSD MAIN MENU
1. Press the AMP button.
2. Press any one of the cursor buttons ( , , , and OK buttons)
to display the “MAIN MENU” of the on-screen display menu.
Choose a desired item in the contents with or button, and
press the OK button to select.
Display will change to menu for each item.
SYSTEM SETUP
SYSTEM SETUP 1/3
6CH. INPUT : The 6 channel direct input of the SR8000 can be
selected to use a 6channel input or front
2channel input. Select 6channel use or
2channel use by or button.
TV AUTO : This product is equipped with a TV-auto ON/
OFF system, which automatically turns on or off
the power 1 second to 5 minutes after the TV
video input signal has been sent or has been
stopped.
Switch the TV AUTO ON/OFF function to enable
or disable with or button.
To use this function, connect the TV video input
to TV tuner’s video output.
TV INPUT : This allows you to choose between the
composite or the S-Video input for use with the
TV auto function.
DIGITAL OUT : This lets you chose which digital input will be
output for digital recording.
To determine each source, display the desired
source and press the or button.
NEXT SETUP/EXIT :If you desire to continue the next setup ,press
the OK button on NEXT-SETUP, if you desire to
exit from OSD menu system, press the OK
button on EXIT.
SYSTEM SETUP 2/3 (SELECTING THE DIGITAL INPUT)
Six digital inputs can be assigned for the desired source.
Use this menu to determine which source is connected to which
input.
Example;
When the digital output of a DVD player is connected to Digital 4
(input jack) of the SR8000;
1. Move the cursor on the line of the DVD with cursor buttons or .
2. Move the cursor on “Dig 4” with cursor buttons or .
3. Press the OK button to chose.
4. If you desire to continue the next setup, press the OK button on
NEXT-SETUP.
If you desire to exit from OSD menu system, press the OK button
on EXIT.
Notes:
The TUNER and AUX are fixed to the analog input, and are
prevented from selecting any digital input.
While the DTS-LD or DTS-CD is playing, this setup is not available,
this is to avoid noise being generated from the analog input. Stop
the LD or CD playback to setup.
The SR8000 does not switch from digital input to analog input or
vice versa automatically.
In the event that both digital and analog inputs are connected to
SR8000, if you desire to switch to an analog input temporarily, you
can switch by pressing the A/D button.
SYSTEM SETUP 3/3 (DC CONTROL OUTPUT)
SR8000 has two DC control jacks, each one is selectable to link with
input functions for the main room or multi room.
You can select MAIN ROOM or MULTI ROOM for DC1 & DC2
independently by , or OK button.
And then move the cursor to select the linked input function you
desired by or button and press OK button to chose.
SOURCE DIG.1 DIG.2 DIG.3 DIG.4
OFF
DIG.5DIG.6