Marantz SR7400 Home Theater System User Manual


  Open as PDF
of 52
 
27
ENGLISH
ENGLISH
SPEAKER A/B
SR7400 has speaker system - A and speaker system-
B for front L/R channels.
You can select these systems by pressing
SPEAKERS A/B button on the front panel or SPK- AB
on the remote
7.1 CH INPUT.
The SR7400 is equipped for future expansion
through the use of Multi channel SACD multichannel
player or DVD-Audio player.
When this is selected, the input signals connected
to the L(front left), R (front right), CENTER, SL
(surround left), SR (surround right), SBL (surround
back left) and SBR (surround back right) channels
of the 7.1 CH. In jacks are output directly to the
front (left and right), center, surround (left and
right) and surround back speaker systems as well
as the pre-out jacks without passing through the
surround circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
The video input source is selected in the SETUP
MAIN MENU to use this procedure. (Refer to 7.1
CH INPUT LEVEL, page 21)
1.
Press the 7.1 CH INPUT button on the front
panel or press 7.1CH on the remote to switch
the 7.1 channel input.
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source
selected for listening through the SR7400 is sent to
the record outputs.
This means that any program you are watching or
listening to may be recorded simply by placing
machines connected to the outputs for TAPE OUT,
CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT
in the record mode.
To record the input source signal you are
currently watching or listening to
1.
Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
2.
The currently selected input source signal is
output to the TAPE OUT , CD-R/MD OUT, VCR1
OUT, and DSS/VCR2 OUT outputs for recording.
3.
Start recording to the recording component as
desired.
Recording the video from one source and the
audio from another
You can add the sound from one source to the
video of another source to make your own video
recordings.
Below is an example of recording the sound from a
compact disc player connected to CD IN and the
video from a video camera connected to AUX IN to
video cassette recorder connected to the VCR1 OUT
jack.
1.
Press the AUX1 input source button to set
video output.
2.
Press the CD input source button to set audio
output.
3.
Now “CD” has been selected as the audio
input source and “AUX1” as the video input
source.
Notes:
•
If you change the input source during recording,
you will record the signals from the newly selected
input source.
• You cannot record the surround effects.
• Digital input signals are only output to the digital
outputs. There is no conversion from digital to
analog .
When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.
HT-EQ
Press the AMP button and press the > button until
PAGE2 is displayed. Press the HT-EQ (D5) button
to turn on the HT-EQ mode.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is because
film soundtracks were designed to be played back
in large movie theater environments.
Activating the HT-EQ feature when watching a film
made for movie theaters corrects this and restores
the correct tonal balance.
400
MEMORY
TUNING
MODE
CLEAR
DSS/VCR2
AUX1
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B
F/P
AUX1
CD
1. 2.
DSS
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
VCRDVD
TV
12
LIGHT
Learning Remote Controller
RC1400
AUX1
CD
2.
1.
7400
MEMORY
TUNING
MODE
CLEAR
DSS/VCR2
AUX1
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B
F/P
DISPMULTI AUTO TUNED STV
–
OFFNIGHTPEAK ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT DISC 6.1MTX 6.1SPKRABEQ
DIGITAL
SURROUND
PCM
L
C
R
SL SSR
LFE
AV SURROUND RECEIVER SR7400
SELECTOR
MEMORY
TUNINGCLEAR
POWER ON/STANDBY
PHONES
ENTER
STANDBY
SELECT
DSS/VCR2
AUX1
VCR1
DVD
TV
MULTI SPEAKMULTISPEAKERS A/BSPEAKERS A/B
2.
If it is necessary to adjust the output level of
each channel, use “7.1 Ch. INPUT LEVEL” in
the OSD menu system as desired.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjustments will be stored to 7.1 Ch.
INPUT memory. (see to page 21)
3.
Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
To cancel the 7.1 Ch. INPUT setting, press the 7.1
CH INPUT button on the front panel or press 7.1 CH
on the remote.
Notes:
• When the 7.1 Ch. Input is in use, you may not
select a surround mode, as the external decoder
determines processing.
• In addition, there is no signal at the record outputs
when the 7.1 Ch. Input is in use.
•
SBL and SBR of the speaker terminals are emitted
no signal when the SURROUND BACK
SPEAKER is set NONE in SPEAKER SETUP
menu. (See SPEAKER SETUP, page 18)
AUX2 INPUT
If you don’t need to connect 7.1 Ch. input terminals
with multi channel decoder,
L(front left) and R (front right) inputs terminals are
available as AUX2 input.
In this case, You can connect additional audio
source to AUX2 as other audio input terminals.
DO
MEMORY
TUNING
MODE
R
DSS/VCR2
AUX1
VCR1
DVD
CD
CD-R
TAPE
TUNER
7.1CH INPUT AUX2MULTI SPEAKERMULTIS A/B
F/P
DIG
1.
7.1CH INPUT
RECEIVER SR7400
MEMORY
TUNING
MODE
CLEAR
S
DSS/VCR2
AUX1
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B
F/P
1.
DSS/VCR2
AUX1
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
DSS
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
VCRDVD
TV
12
LIGHT
Learning Remote Controller
RC1400
TAPE
DSS
AUX2
AUX1
TUNER
CD
CD-R
MD
VCRDVD
TV
1.
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
12
LIGHT
Learning Remote Controller
RC1400
AMP
D4
D5
D2
M
D1
D3
D5
VOL
CH
USE
PAGE
2
D5
2 31
5 64
8
0
97
MEMO
CLEAR
PREV
MUTE
MENU
EXIT
GUIDE
TEST
CH.SEL
SURR
7.1CH
ATT
SPK-AB
DISP
OSD
SLEEP
6
SPK-AB
2 31
5 64
8
0
97
MEMO
CLEAR
PREV
MUTE
MENU
EXIT
GUIDE
TEST
CH.SEL
SURR
7.1CH
ATT
SPK-AB
DISP
OSD
SLEEP
4
7.1CH
1.
VOLUME
DOWN
TUNING
MODE
MUTE
AUX1 INPUT
S-VIDEO VIDEO L AU
S-DIREC
AUX1
CD
CD-R
TAPE
TUNER
7.1CH INPUT AUX2MULTI SPEAKER
F/P
DIGITAL
AUX2
DSS
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
VCRDVD
TV
12
LIGHT
Learning Remote Controller
RC1400
AUX2
03.10.13, 9:25 AMPage 27
 previous next